Waveform Recording and Playing
Play Mode
Start Frame
Before playing the waveforms, set the following parameters.
1. Play Mode
You can play the waveforms in single mode (
-
-
is repeated until you stop it manually.
2. Play Sequence
You can play back the waveforms clockwise (
-
-
3. Interval
The playback interval indicates the time interval between the frames during the
playing process.
Click or tap the input field of Interval, and then use the pop-up numeric keypad to
set the time interval between frames. You can also use the corresponding
multipurpose knob to set the value. The available range is from 1 ms to 1 s.
4. Start Frame
DHO800 User Guide
190
Back to Start
Previous Frame Play Button
Frame
Figure 17.2 Minimized "Play" Menu
: plays from the start frame to the end frame, and then stops automatically.
: plays from the start frame to the end frame, then such playback operation
: plays from the start frame to the end frame.
: plays from the end frame to the start frame.
Time Interval
Back to End
Next Frame
Frame
) or cycle mode (
) or counterclockwise (
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Play Sequence
End Frame
).
).