Table of Contents
Advertisement
To Prepare for Use
7
To Prepare for Use
7.1
To Adjust the Supporting Legs
Adjust the supporting legs properly to use them as stands to tilt the oscilloscope
upwards for stable placement of the oscilloscope as well as better operation and
observation. Users can also fold the supporting legs when the instrument is not in
use for easier storage or shipment, as shown in the figure below.
7.2
To Connect to AC Power
The input AC power requirements of the oscilloscope are 100 V-240 V, 45 Hz-440 Hz.
Please use the power cord provided in the accessories to connect the oscilloscope to
the AC power source, as shown in the figure below.
10
Supporting Legs
(a) To unfold the supporting legs
Figure 7.1 To Adjust the Supporting Legs
Power Cord Connector
Figure 7.2 To Connect to AC Power
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
(b) To fold the supporting legs
Advertisement
Table of Contents
