To Prepare for Use
5
5.1
5.2
1.888.610.7664
To Prepare for Use
To Adjust the Supporting Legs
Adjust the supporting legs properly to use them as stands to tilt the oscilloscope
upwards for stable placement of the oscilloscope as well as better operation and
observation. You can also fold the supporting legs when the instrument is not in use
for easier storage or shipment, as shown in the figure below.
Supporting Legs
(a)Unfold the supporting legs
Figure 5.1 Adjusting the Supporting Legs
To Connect to Power
The power requirements of the oscilloscope are DC, 12 V, 4 A. Please use the power
adaptor provided in the accessories to connect the oscilloscope to the AC power
source (100 V to 240 V, 50 Hz to 60 Hz), as shown in the figure below.
www.calcert.com
15
10
20
5
25
0
30
(b)Fold the supporting legs
sales@calcert.com