Figure 8.28 Binary Format Setting; Figure 8.29 Hexadecimal Format Setting - Rigol DHO900 User Manual

Triggering the Oscilloscope
• A&D: the oscilloscope searches for the specified address and data at the same
time, then triggers when both the address and data meet the conditions. After
this condition is selected, you need to set the sub Data-menu items such as
Direction, Bytes, AddrBits, Address, and Data. For the setting methods, refer to
descriptions in "Address" and "Data" conditions.
Trigger Mode
In Sweep, select Auto, Normal, or Single as the trigger mode. For details, refer to
descriptions in
DHO800 User Guide
100

Figure 8.28 Binary Format Setting

Figure 8.29 Hexadecimal Format Setting

Trigger Mode
.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.