Measurements
10.2.3
Measurement Settings
In the Measure menu, click or tap the Setting button to enter the measurement
setting menu.
Histogram
Click or tap the Histogram on/off switch to enable or disable the histogram function.
After the histogram function is enabled, the Measure Histogram view is displayed on
the screen, as shown in the figure below. The histogram analysis result label is
displayed in the Result sidebar (refer to
NOTE
Add at least one measurement item (
Measure Histogram function.
DHO800 User Guide
136
Figure 10.7 Measurement Settings Menu
Histogram Analysis Results
Select the Measurement Item
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
).
) before enabling the