Clock Setting (Clk); Figure 15.2 Parallel Decoding Menu - Rigol DHO900 User Manual

Bus Status
Click or tap the Bus Status on/off switch to enable or disable the bus decoding.
15.1.1

Clock Setting (CLK)

Clock Setting (CLK)
Click or tap the drop-down button of CLK to select from analog channels CH1-CH4. If
"OFF" is selected, no clock channel is set, and sampling is performed when a hop
occurs to the data of the data channel during decoding.
Threshold
You need to set a threshold when the clock signal is an analog channel (CH1-CH4).
Click or tap the input field of Threshold, and then use the pop-up numeric keypad to
set the threshold. You can also use the corresponding multipurpose knob to set the
value. The range of the threshold is related to the current vertical scale and offset.
CLK Edge
You can select "Rising", "Falling", or "Both" in CLK Edge when the clock channel is
set to an analog channel (CH1-CH4).
• Rising: samples the channel data on the rising edge of the clock.
• Falling: samples the channel data on the falling edge of the clock.
• Both: samples the channel data on the rising edge or the falling edge of the
clock.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Figure 15.2 Parallel Decoding Menu

Protocol Decoding
DHO800 User Guide
169