Figure 4.19 Numeric Keypad - Rigol DHO900 User Manual

5. Modify or delete the unwanted characters that have been input
During the name input process, you can modify or delete the unwanted character
if necessary. To delete the characters that have been input, click or tap the
Backspace key in the virtual keypad to delete the characters. To modify the
characters that have been input, delete the unwanted characters first and then
input the new characters.
You can directly move the cursor to the character to be modified or deleted, delete
the desired character or input the new characters after deleting the unwanted
character.
6. Confirm the input
After completing the input operation, click or tap "OK".
Input a Value
When setting or modifying a parameter, input an appropriate value with the numeric
keypad.
• Click or tap the value or unit in the numeric keypad to complete the input.
•
Rotate the multipurpose knob (1/2) to move the cursor to select the desired
value and unit. Press the knob to confirm the input.
Cursor
After you input all the values and select the desired units, the numeric keypad is
turned off automatically. This indicates that you have completed parameter setting.
Besides, after you have input the values, you can also click or tap "OK" directly to
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Ten to the Nth Power Confirmation Key

Figure 4.19 Numeric Keypad

Unit
DHO800 User Guide
Quick Start
Delete Key
Max. Value
Min. Value
Default Key
Clear Key
33