Histogram Analysis; To Enable Or Disable The Histogram Function; Figure 12.1 Histogram Menu - Rigol DHO900 User Manual

Histogram Analysis

12
Histogram Analysis
The histogram analysis function can provide the statistic view for waveform and
measurement results, enabling you to judge the trend of waveforms, and quickly
locate the potential problems of the signal. This series oscilloscope supports
histogram types including Horizontal, Vertical, and Measure. For the Measure
Histogram function, refer to
only introduces the Horizontal and Vertical histogram.
Click or tap the function navigation icon
Histogram menu.
12.1

To Enable or Disable the Histogram Function

In Histogram menu, click or tap the Enable on/off switch to enable or disable the
histogram analysis. After the histogram function is enabled, with the on-going
acquisition and measurement of the waveforms, the height of the bar graph will
change within the set range of the histogram window to indicate the number of times
for data statistics.
Take horizontal histogram as an example. After the histogram function is enabled, the
histogram analysis view as shown in the figure below is displayed on the screen. Also,
the "Histogram" label appears on the Result bar at the right side of the screen.
DHO800 User Guide
154
Histogram
of the "Measurements" chapter. This chapter
and select Histogram to enter the

Figure 12.1 Histogram Menu

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.