Figure 4.17 Chinese Input Interface - Rigol DHO900 User Manual

1. Select Chinese input method
First check the input method type. If it shows "中/En", then go to Step 2; if it
shows "En/中", click or tap the input method switchover key to switch to
"中/En" (Chinese input method).
2. Clear the name input area
If there is no character in the "Name Input Area", please go to the next step. If
there are characters in the "Name Input Area", click or tap the Backspace key
to delete all the characters from the "Name Input Area" in order.
If there are characters in the "Pinyin Input Area", when you delete characters
from the name input area, the characters in the Pinyin input area will be
deleted first.
3. Input Chinese characters
Click or tap the characters in the virtual keypad to input Pinyin into the input
area, then the characters to be selected will be displayed in the Chinese
character selection area. Slide to view more Chinese characters for you to
choose. Select the desired Chinese character, and then the selected character
will be displayed in the input area.
4. Modify or delete the unwanted characters that have been input
During the name input process, you can modify or delete the unwanted
character if necessary. To delete the characters that have been input, click or
tap the Backspace key in the virtual keypad to delete the characters. To
modify the characters that have been input, delete the unwanted characters
first and then input the new characters.
5. Confirm the input
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Pinyin Input Area

Figure 4.17 Chinese Input Interface

Quick Start
Chinese Character
Selection Area
DHO800 User Guide
31