Search and Navigation
After "Search Event" is selected, click or tap Search to open the "Search" menu and
set the search condition. For search setup, please refer to
search type from the Type item. Click or tap
to go to the next search event. Click or tap
go to the last event.
Navigate segments
This mode is available only in UltraAcquire acquisition mode. When UltraAcquire is
enabled, the Mode is automatically set to "Frame Segment" which cannot be
modified. Its setting menu is as shown in
•
In this mode, you can click or tap the Display mode drop-down button to set
the display mode of segments. For details, please refer to
•
Click or tap Start Frame and End Frame input fields to set the start frame and
end frame which define the segment range to navigate through. You can also
use the corresponding multipurpose knob to set the start/end frame. After you
DHO800 User Guide
196
Figure 18.5 "Search Event" Navigation Setting Menu
Figure 18.6 "Frame Segment" Navigation Setting Menu
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Search
. You can select the
to go to the previous search event or
to go to the first event or
Figure 18.6
.
UltraAcquire
to
.