To Prepare For Use; To Adjust The Supporting Legs; To Connect To Power - Rigol DHO924 Quick Manual

5
5.1
5.2
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
1.888.610.7664

To Prepare for Use

To Adjust the Supporting Legs

Adjust the supporting legs properly to use them as stands to tilt the oscilloscope
upwards for stable placement of the oscilloscope as well as better operation and
observation. You can also fold the supporting legs when the instrument is not in use
for easier storage or shipment, as shown in the figure below.
（a）Unfold the supporting legs
Figure 5.1 Adjusting the Supporting Legs

To Connect to Power

The power requirements of the oscilloscope are DC, 12 V, 4 A. Please use the power
adaptor provided in the accessories to connect the oscilloscope to the AC power
source (100 V to 240 V, 50 Hz to 60 Hz), as shown in the figure below.
www.calcert.com
15
10 20
5 25
0 30
Supporting Legs
（b）Fold the supporting legs
sales@calcert.com
13