Table of Contents
Advertisement
9. 1
Press the arm latch. 2
arm.
OPEN Compensation Key Sequence
1. Press
NNNNNNNNNNNNNN
OPEN .
2. After the open compensation sequence is completed, the
3. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DONE: COMPEN .
4. Verify that two CMP notations appear on the left side of the display.
Connecting DUT
1. 1
Latch o the arm latch. 2
arm.
C-4
Fixture Compensation Procedures for the 16191A and 16193A
Turn down the pressure
Hold up the pressure
NNNNNNNNNNNNNN
OPEN softkey label is underlined.
2. Place the DUT on the electrodes.
Advertisement
Table of Contents
