Table of Contents
Advertisement
4. Place the shorting device on the electrode.
6. 1
Reposition the positioner so that the nose of the
pressure arm is just above the shorting device. 2
Tighten the locking knob.
SHORT Compensation Key Sequence
1. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
FIXTURE COMPEN
4
Cal
5
After the short compensation sequence is completed, the
OPEN Compensation
5. 1
that the short bar contacts both electrodes. 3
Tighten the knob to x the DUT holder.
7. 1
released. 2
the shorting device.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNN
SHORT .
COMPEN MENU
Fixture Compensation Procedures for the 16191A and 16193A
Loosen the knob. 2
Position the DUT holder so
Push the arm lifter so that the arm latch is
Let down the pressure arm to press down
NNNNNNNNNNNNNNNNN
SHORT softkey label is underlined.
C-7
Advertisement
Table of Contents
