8. Verify that pressure arm presses the shorting
device.
SHORT Compensation Key Sequence
1. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
FIXTURE COMPEN
4
Cal
5
2. After the short compensation sequence is completed, the
OPEN Compensation
1. Place the DUT on the electrolde just as you set the
shorting device in the short compensation.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNN
SHORT .
COMPEN MENU
2. Remove the DUT from the electrodes.
Fixture Compensation Procedures for the 16191A and 16193A
NNNNNNNNNNNNNNNNN
SHORT softkey label is underlined.
C-3