Table of Contents
Advertisement
3. 1
Loosen the knob. 2
that the DUT contacts both electrodes. 3
knob.
3. 1
Push the arm lifter so that the arm latch is
released. 2
Let down the pressure arm to press down
the DUT.
Position the DUT holder so
Tighten the
Fixture Compensation Procedures for the 16191A and 16193A
Reposition the positioner so that the nose of the
1
pressure arm is just above the DUT. 2
locking knob.
Tighten the
C-9
Advertisement
Table of Contents
