Setting Up Beeper - Agilent Technologies 4286A User Manual

Setting up Beeper

Beepers can be used to announce results of limit test and BIN sorting.
The beeper can be set to sound when both of BIN sorting and limit test passed or both of them
failed.
Follow the procedure below.
1. Press
, and then
Test Setup
4 5
2. If you wish to sound the beeper when both of BIN sorting and limit test passed, press
If you wish to sound it when both of BIN sorting and limit test failed, press
NNNNNNNNNNN
OFF when you do not wish to sound the beeper regardless of test results. In other words, if
either of BIN sorting or limit test failed, the beeper does not sound for any settings.
3. Press
NNNNNNNNNNNNNNNNNNNN
RETURN .
4-8 4286A with Chip Handler
NNNNNNNNNNNNNN
BEEP .
NNNNNNNNNNNNNN
PASS .
NNNNNNNNNNNNNN
FAIL . Press