Specifications Of The Conductivity Module "Cond; Specifications Of The Ethernet Module M1 - Burkert 8619 Operating Instructions Manual

Type 8619
Technical data
6.10.6

Specifications of the conductivity module "COND"

Resistance measurement (without
conductivity sensor connected)
Power consumption
Type of conductivity probe
Conductivity measurement (with
connected conductivity sensor)
• Measurement range
• Measurement resolution
• Systematic variation in the measurement
Resistivity measurement
(with connected conductivity sensor)
• Measurement range
• Measurement resolution
• Systematic variation in the measurement
(without sensor)
Temperature measurement
• Measurement range
• Measurement resolution
• Systematic variation in the measurement
• Temperature sensor type
6.10.7

Specifications of the Ethernet module M1

Power consumption
Supported network protocols
LEDs
Electrical connection
5 Ω...1 MΩ
0.25 VA
With 2 or 4 electrodes; the specifications of Bürkert cells are
described in the related operating instructions.
• 0.000 µS/cm...2 S/cm (depends on the conductivity sensor)
• 10–9 S/cm
• ±0.5 % of the measured value + conductivity sensor error
• 0.500 Ω.cm...100 MΩ.cm (depends on the conductivity sensor)
• 10–1 Ω.cm
• ±0.5 % of the measured value + conductivity sensor error
• –40 °C...+200 °C
• ±0.1 °C
• ±1 °C + temperature probe error
• Pt100 or Pt1000, with 2 or 3 wires
2.2 VA
• Modbus TCP
• PROFINET
• EtherNet/IP
• 2 Link/Act LED (yellow)
• 2 Link LEDs (green)
• 2 ports for an RJ45 connector
English
35