Burkert 8619 Operating Instructions Manual page 13

Type 8619
Description
H: Navigation button (4 directions)
J: 4 dynamic keys
K: 2 LEDs
5.3 Construction of a 8619 multiCELL WM DC
Device with-
out Ethernet
extension
module
Device with
Ethernet
extension
module
Fig. 2: Construction of a 8619 multiCELL WM DC
A: Wall-mounting housing; Cover with seal, closed by 4 screws; Display with navigation button, dynamic
keys and LEDs
B: Main board (identified by "M0" on the plate) with two digital inputs (identified by "DI", digital input), two
4...20 mA current outputs (identified by "AO", analogue output) and two digital outputs (identified by "DO",
digital output)
C: Wall-mounting plate, removable
D: Memory card slot
E: 1 to 6 slots (4 slots for an Ethernet version) for the extension modules
Possible extension modules:
• Module with light grey connector for connection of a pH sensor or oxidation reduction potential sensor
and/or a temperature sensor
• Module with green connector for connection of a conductivity sensor and/or a temperature sensor
• Module with black connector with two 4...20 mA current outputs and two digital outputs
• Module with orange connector with two analogue inputs and two digital inputs
If a slot is unused, a cap blanks off the opening.
A B
M0
M1
M3
M5
K J
C
D
E
M2
M4
G
M6
FE
H
F
English
L
M
N
O
13