Specifications.of.the.positioner; Operating Conditions; Conformity; Mechanical Data - Burkert 8792 Operating Instructions Manual

Types 8792, 8793
Description of System
10.3. specifications of the positioner
10.3.1. Operating conditions
note!
If.used.outside,.the.device.may.be.exposed.to.direct.sunlight.and.temperature.fluctuations.which.may.
cause.malfunctions.or.leaks!
• If the device is used outdoors, do not expose it unprotected to the weather conditions.
• Ensure that the permitted ambient temperature does not exceed the maximum value or drop below the minimum value.
Environmental temperature
Protection class
10.3.2.

conformity

CE mark conforms to EMC Directive 2004/108/EC (until now: 89/336/EMC)
(only if cables, plugs and sockets have been connected correctly)
10.3.3. Mechanical data
Dimensions
Material
Housing material
Other external parts
Sealing material
Mass
10.3.4. electrical data
Connections
Power supply
Power consumption
Input data for actual value signal
4 – 20 mA:
0 – +60 °C
IP 65 / IP 67* according to EN 60529
(only if cables, plugs and sockets have been connected correctly)
* If the positioner is used under IP 67 conditions, the ventilation filter (see
Fig. 1:Structure, positioner type 8792 / 8793) must be removed and the
exhaust air conducted into the dry area.
See data sheet
Plastic-coated aluminium
Stainless steel (V4A), PC, PE, POM, PTFE
EPDM, NBR, FKM
approx. 1.0 kg
2 cable bushings (M20 x 1.5) with screw-type terminals 0.14 – 1.5 mm
multi-pole plug
24 V DC ± 10% max. residual ripple 10%
< 5 W
180 Ω
Input resistance
Resolution 12 bit
or
2
English
33