Customising User Views 1 To 4 - Burkert 8619 Operating Instructions Manual

9.9

Customising user views 1 to 4

Refer to section 8.10 to access the "Parameters" menu.
Parameters Display
This is
when the
device is be-
ing parame-
tered............
....................
1) If "Type" = 1, 2 or 4 "lines"
2) The choices offered depend on the modules fitted and/or the options activated. See section 9.5 and section 15.
3) The choices offered depend on the choice made in "PV" above
4) If "Type" = "graph"
TYPE: Choosing to display 1, 2 or 4 values (on 1, 2 or 4 lines) or a graph in the customised "Ux" view
selected.
TITLE: Entering the name displayed in the corresponding "Ux" view. See section 8.4 Entering text.
Indicates the number
of the board or module
from which the pro-
cess value PV originates.
Fig. 52: Example of a title for a customised view
LINE1 TO LINE4: Setting the parameters for the values (1, 2 or 4) displayed in a customised "Ux" view:
- PV: Select the digital input, the analogue output, the physical parameter, the value entered by the user
(PVC) or the value coming from a PLC (PVN) to be displayed on the line selected in this customised view.
The options available depend on the modules fitted.
One of the "PVs" in the conductivity module, available for the customised "Ux" views, is "USP"
(see section 9.29).
86
User view 1...4
This is
when the
device is be-
ing parame-
tered............
....................
U3:PROCESS1
1
3
0
1
MENU
English
Type: None
1 line
2 lines
4 lines
graph
Title: ENTERING
Line1...4: PV:
1)
Unit
Filter
Period: ENTERING
4)
y min: ENTERING
4)
y max: ENTERING
4)
29/06/2010
13:40 The title of the view is displayed
7 pH
here.
1 S/cm
205 l/min
±43 °C
Type 8619
Parameters menu
M0:None
... 2)
Mx:
3)
None
Fast
Slow