Supplying An External Instrument Via A 8619 Multicell; Supplying An External Instrument Via A 8619 Multicell Wm - Burkert 8619 Operating Instructions Manual

Type 8619
Installation and wiring
7.3.6 Supplying an external instrument via a 8619 multiCELL
The device in a panel-mounted version can be used to supply an external instrument, for example a flow
sensor, with a voltage identical to the supply voltage of the device.
The power supply is available on the main board "M0" of a 8619 multiCELL.
12...36 VDC
Electrical power supply
Fig. 16: Supplying an external instrument via a 8619 multiCELL
7.3.7

Supplying an external instrument via a 8619 multiCELL WM

The device can be used to supply power to several external instruments, such as flow sensors or conduc-
tivity sensors for example.
→ To supply power to an external instrument, connect it to a positive and negative screw terminal on the
terminal block "POWER OUT".
The voltage available on the green terminal block "POWER OUT" of a 8619 multiCELL WM:
• is equal to the supply voltage of the 8619 multiCELL WM DC which is supplied with a voltage of
12...36 V DC.
• is equal to a voltage of 24 V DC on a 8619 multiCELL WM AC which is supplied with a voltage of 110...240 V AC.
Fig. 17: Supplying external instruments via a 8619 multiCELL WM *
-
+
SUPPLY PWR OUT DI1
Removable screw terminals, 21-positions, black
POWER OUT
+ - + - +
Removable screw terminals,
12-positions, green
Power supply available for
an external instrument
DI2 FE AO1 AO2 FE
- + - + - + -
DO1 DO2 FE
English
49