Configuring The Pid Function - Burkert 8619 Operating Instructions Manual

9.18.1

Configuring the PID function

Refer to section 8.10 to access the Parameters menu.
Parameters Functions
This is
when the
device is be-
ing parame-
tered............
....................
1) T he choices offered depend on the modules fitted and/or the options activated. See section 9.5 Consulting and/or
activating the available software options and section 15 Process variables.
2) This function is present if "SP Type" = "external"
3) These functions are present if "Reg. Type Mode" = "non-linear"
114
F1...F12:
This is
when the
device is be-
ing parame-
tered............
....................
.
.
.
English
PID
Setup Channel:
PV
SP Type:
SP:
2)
PV range
Reg type:
CMD Direction
Advanced
Type 8619
Parameters menu
Mono
Dual
M0:MAIN
1)
...
Mx:
internal
external
M0:MAIN
1)
...
Mx:
PV-: ENTERING
PV+: ENTERING
Mode: Linear
non-linear
ENTERING
Low:
3)
High: ENTERING
Channel 1/2 Rise
Fall
See page 117