Burkert 8619 Operating Instructions Manual page 127

Type 8619
Parameters menu
Parameters Functions
This is
This is
when the
when the
device is be-
device is be-
ing parame-
ing parame-
tered............ tered............
.................... ....................
TYPE: Choose the type of the function (here, "VOLUME DOSING").
NAME: Rename the function chosen. See section 8.4 Entering text. This name appears in the view asso-
ciated with this function in Process level.
STATE: Used to activate (choose "ON") or deactivate (choose "OFF") the selected function.
At each start-up of the device, the functions are checked. If there is a problem with a function, the
device automatically deactivates the function.
LOCK:
- ON: the mode and the setpoint value cannot be modified in the Process level without entering an
access code. Refer to Fig. 83. To switch the mode between the manual mode and the automatic mode
or to change the value of the setpoint, first enter the access code of the "Parameters" menu. The
default access code is "0000" (see section 9.4).
- OFF: the mode in the Process level can be switched and the value of the setpoint can be set without
entering an access code.
PV: Define the digital input "DI1 Pulse" or "DI2 Pulse" of the main board "M0" as the volume metering base.
VOLUME: Enter the volume to be metered.
DOSING TIME: Enter the duration of dosing.
CMD SAFE: Confirm (select "Mode: ON") or do not confirm (select "Mode:OFF") the use of a fallback
position on the output when the "System switch" event (see section 9.21) has the state "ON". When use of
the fallback position is confirmed, enter a fallback position value of 0...100 % for each output.
"volume"
Fig. 84: Example of the "volume dosing" function
F1...F12:
VOL. DOSING
"volume"
"dosing time"
Type:
Name:
State:
Lock:
PV
Volume:
Dosing time
CMD SAFE
"volume" = v1+v2+v3+v4+v5+v6
v2 v3 v5 v6
v1
v4
ENTERING
OFF
ON
ON
OFF
M0:MAIN
None
DI1 Pulse
DI2 Pulse
Mx: None
ENTERING
ENTERING
State: OFF
ON
Value: ENTERING
English
127