Procedure
1. Power down the server.
2. Open the chassis front door.
3. Install the fan module.
4. Close the chassis front door.
5. Power up the server.
More information
Open the chassis front door
Close the chassis front door
Drive options
Supported configurations
The secondary riser has two x8 Slimline connectors for installing either two processor direct NVMe drives, or one
processor direct NVMe drive and one SATA drive.
8 SFF Gen10 SAS/SATA backplane configurations
Drives
8 + 8 embedded SATA SSDs
8 + 8 SAS/SATA SSDs
1
Supports two M.2 SSD modules per system board module
For cabling information, see Gen10 Plus 8 SFF SAS/SATA Standard backplane cabling.
1
1
Controllers
Embedded SATA
E208i-p or P408i-p
Hardware options installation
56