Processing The Device List; End Program - Aventics DDL-X-Tool Operating Instructions Manual

7.11 Processing the device list

To process the list of available devices in the "Devices" menu:
1. Stop the connection, if necessary.
2. Click on "Settings > Device list".
The "Configuration of the device list" mask will open up.
3. Select the checkboxes for the desired devices.
4. Confirm with "Close and save".
The selected devices will now appear in the "Devices" menu.
7.11.1 Activating customer-specific devices
The device list can be expanded if you are using customer-specific devices. A password is required
to do this. Please contact one of the addresses found under www.aventics.com/contact.
Enter the password in the password field and press "Activate".
The device list will be extended to include the customer-specific device.

7.12 End program

Click on "End" in the "File" menu.
If there is any communication, it will be stopped and all masks closed.
AVENTICS | DDL-X-Tool | R412008351–BAL–001–AC
Operating the DDLfWin software
79