Sharp MX-C507P Service Manual page 524

Storage temperature and relative humidity
Enabling the security reset jumper
Notes:
•
Before changing the security settings, ask for permission from your administrator.
•
Resetting the printer deletes all security settings.
•
For MFPs, replacing the controller board deletes all security settings.
•
If LDAP is used to authenticate the copy function in MFPs, then the LDAP configuration and copy
function are no longer protected.
•
To prevent the tampering of the jumper, secure the controller board cage with a Kensington lock. To
disable the effect of the jumper reset, select No Effect from the Security Reset Jumper Setting section in
the Security menu.
•
If Enable Audit is activated from the Security Audit Log section in the Security menu, then the printer logs
a message each time the jumper is reset.
To reset the jumper:
1
Turn off the printer.
2
Access the controller board.
3
Locate the jumper on the controller board.
Note: The jumper is located next to a lock icon on the controller board.
Printer specifications
492
1 to 35°C (34 to 95°F)
8 to 80% RH
5028