Table of Contents
Advertisement
Menu item
Print Configuration
Quiet Mode
Off*
On
Device Operations
Panel Menus
Off
On*
Device Operations
Safe Mode
Off*
On
Device Operations
Clear Custom Status
Device Operations
Automatically Display Error Screens
Off
On*
Device Operations
Clean sensing and laser optics
Device Operations
Calibration frequency preference
Disabled*
Fewest color adjustments
Fewer color adjustments
Normal
Better color accuracy
Best color accuracy
Device Operations
Automatic Media Type Detection
Off
On*
Device Operations
Custom Supply Levels
Off*
On
Toner patch sensor setup
Calibration frequency preference
Toner patch sensor setup
Full calibration
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Reduce the amount of noise that the printer makes when
printing.
Set the printer to show the control panel menus.
Set the printer to operate in a special mode, in which it attempts
to continue offering as much functionality as possible, despite
known issues.
Erase all custom messages.
Show existing error messages on the display when the printer
returns to an active state.
Set the printer to run its wipers and clean the sensing and laser
optics.
Note: This setting is available only in some printer models.
Set the printer to put down the correct amount of toner to
maintain color consistency.
Set the printer to detect the paper type being loaded.
Set supply levels.
Set the printer to put down the correct amount of toner to
maintain color consistency.
Run the full color calibration.
Service menus
286
5028
Advertisement
Table of Contents
