Sharp MX-C507P Service Manual page 117

Action
Step 10
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Motor tests > Deskew
b
Touch Start.
Does the motor run?
Step 11
Check the motor cable for proper connection and damage, and
replace if necessary.
Does the problem remain?
Step 12
Replace the motor (registration).
Does the problem remain?
Sensor (input): Paper failed to clear service check
Action
Step 1
a
From the home screen, touch Settings > Device > Preferences.
b
Check if the paper size matches the size set on the tray guides.
Does the paper size match the size set on the tray?
Step 2
Change the paper size or adjust the size setting in the tray.
Does the problem remain?
Step 3
Check the paper path for paper jams and obstructions.
Is the paper path free of jams and obstructions?
Step 4
Remove the jams and obstructions.
Does the problem remain?
Step 5
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Sensor tests
b
Find the sensor (Input).
Does the sensor status change while toggling the sensor?
Diagnostics and troubleshooting
83
Yes
Contact the next
level of support.
Go to step 12.
Contact the next
level of support.
Yes
Go to step 3.
Go to step 3.
Go to step 5.
Go to step 5.
Go to step 8.
5028
No
Go to step 11.
The problem is
solved.
The problem is
solved.
No
Go to step 2.
The problem is
solved.
Go to step 4.
The problem is
solved.
Go to step 6.