Table of Contents
Advertisement
Action
Step 12
a
Replace the motor. See
page
352.
b
Perform a print job.
Does the problem remain?
Sensor (duplex path 1): Paper cleared too early service check
Action
Step 1
a
From the home screen, touch Settings > Device > Preferences.
b
Check if the paper size matches the size set on the tray guides.
Does the paper size match the size set on the tray?
Step 2
Change the paper size or adjust the size setting in the tray.
Does the problem remain?
Step 3
Check the duplex rollers for damage.
Are the rollers free of damage?
Step 4
Replace the duplex assembly.
Does the problem remain?
Step 5
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Sensor tests
b
Find the sensor (Duplex path 1).
Does the sensor status change while toggling the sensor?
Step 6
Check the sensor cable for proper connection, and then reseat if
necessary.
Does the problem remain?
Step 7
Replace the sensor.
Does the problem remain?
"Motor (duplex/MPF) removal" on
Diagnostics and troubleshooting
Yes
Contact the next
level of support.
Yes
Go to step 3.
Go to step 3.
Go to step 5.
Go to step 5.
Go to step 8.
Go to step 7.
Go to step 8.
104
5028
No
The problem is
solved.
No
Go to step 2.
The problem is
solved.
Go to step 4.
The problem is
solved.
Go to step 6.
The problem is
solved.
The problem is
solved.
Advertisement
Table of Contents
