Sharp MX-C507P Service Manual page 183

Action
Step 19
Reinstall or replace the motor. See
pass‑through) removal" on page
Does the problem remain?
Step 20
Perform a print test.
Does the problem remain?
Sensor (tray 3 pass-through): Paper failed to arrive service check
Action
Step 1
a
From the home screen, touch Settings > Device > Preferences.
b
Check if the paper size matches the size set on the tray guides.
Does the paper size match the size set on the tray?
Step 2
Change the paper size or adjust the size setting in the tray.
Does the problem remain?
Step 3
Check if the paper size matches the size set on the tray guides.
Does the paper size match the size set on the tray?
Step 4
Replace the paper or change the paper size setting in the tray.
Does the problem remain?
Step 5
Check the paper tray for overfilling.
Is the paper tray overfilled?
Step 6
Remove the excess paper from the tray.
Does the problem remain?
Step 7
Check the paper condition in the tray.
Is the paper crumpled or damaged?
"Motor (550-sheet tray
416.
Diagnostics and troubleshooting
149
Yes
Go to step 20.
Contact the next
level of support.
Yes
Go to step 3.
Go to step 3.
Go to step 5.
Go to step 5.
Go to step 6.
Go to step 7.
Go to step 8.
5028
No
The problem is
solved.
The problem is
solved.
No
Go to step 2.
The problem is
solved.
Go to step 4.
The problem is
solved.
Go to step 7.
The problem is
solved.
Go to step 9.