Table of Contents
Advertisement
Action
Step 11
a
Replace the motor (550-sheet tray pass‑through). See
(550-sheet tray pass‑through) removal" on page
b
Perform a print job.
Does the problem remain?
Sensor (MPF/pass-through): Paper (tray 4) failed to arrive service check
Action
Step 1
a
From the home screen, touch Settings > Device > Preferences.
b
Check if the paper size matches the size set on the tray guides.
Does the paper size match the size set on the tray?
Step 2
Change the paper size or adjust the size setting in the tray.
Does the problem remain?
Step 3
Check the paper path in tray 3 for paper jams and fragments.
Is the paper path free of jams and fragments?
Step 4
Remove the paper jams and fragments.
Does the problem remain?
Step 5
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Sensor tests
b
Find the sensor (MPF/pass‑through).
Does the sensor status change while toggling the sensor?
Step 6
Check the sensor cable for proper connection and damage, and
replace if necessary.
Does the problem remain?
Step 7
Check the sensor for damage and replace if necessary.
Does the problem remain?
"Motor
416.
Diagnostics and troubleshooting
124
Yes
Contact the next
level of support.
Yes
Go to step 3.
Go to step 3.
Go to step 5.
Go to step 5.
Go to step 8.
Go to step 7.
Go to step 8.
5028
No
The problem is
solved.
No
Go to step 2.
The problem is
solved.
Go to step 4.
The problem is
solved.
Go to step 6.
The problem is
solved.
The problem is
solved.
Advertisement
Table of Contents
