Sharp MX-C507P Service Manual page 267

Action
Step 11
Check the motor cable for damage.
Is the cable free of damage?
Step 12
Replace the paper feeder. See
page 411.
Does the problem remain?
Step 13
Reset the printer.
Does the problem remain?
Motor (tray [x] pass‑through) stalled service check
Action
Step 1
a
Enter the Diagnostics menu, and then navigate to:
Additional input tray diagnostics > Motor tests >
Pass‑through (tray [x])
b
Touch Start.
Does the motor run?
Step 2
Check the motor cable for proper connection, and reseat if
necessary.
Does the problem remain?
Step 3
Replace the motor. See
removal" on page
Does the problem remain?
Step 4
Check the motor for noise.
Does the motor sound abnormal or do the gears make a grinding
sound?
Step 5
Perform a print job.
Does the problem remain?
"Media feeder removal" on
"Motor (550-sheet tray pass‑through)
416.
Diagnostics and troubleshooting
Yes
Go to step 13.
Go to step 13.
Contact the next
level of support.
Yes
Go to step 4.
Go to step 3.
Go to step 4.
Contact the next
level of support.
Go to step 6.
233
5028
No
Go to step 12.
The problem is
solved.
The problem is
solved.
No
Go to step 2.
The problem is
solved.
The problem is
solved.
Go to step 5.
The problem is
solved.