6. Carefully insert the edge connector of the add-in card into the slot on the riser card. Ensure the card
is fully seated.
Figure 39. Riser Card - Close Filler Plate Retention Cover
7. Close the filler plate retention cover (see Letter A) until it clicks into the locked position (see Letter B).
Figure 40. Riser Card - Auxiliary PCIe* Cable Connection
8. (If present) Reattach all auxiliary PCIe cables to the backside of the riser card. Cables should be locked
when fully seated.
Intel® Server System M70KLP Family Service Guide
Figure 38. Riser Card - Add-in Card Installation
36