Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Intel M70KLP Series
Summary of Contents for Intel M70KLP Series
- Page 1 Intel® Server System M70KLP Family Technical Product Specification An overview of product features, functions, architecture, and support specifications. Rev. 1.0 April 2021 Delivering Breakthrough Data Center System Innovation – Experience What’s Inside !
- Page 2 Intel® Server System M70KLP Family Technical Product Specification <Blank Page>...
- Page 3 Intel® Server System M70KLP Family Technical Product Specification Document Revision History Date Revision Changes April 2021 Production External Release...
- Page 4 Copies of documents which have an order number and are referenced in this document may be obtained by calling 1-800-548-4725 or by visiting www.intel.com/design/literature.htm. Intel, Xeon, Intel Optane, and the Intel logo are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.
-
Page 5: Table Of Contents
Intel® System Information Retrieval Utility (SYSINFO) ................... 26 4. Processor Support .............................. 28 Processor Heat Sink Module (PHM) ........................29 Gen Intel® Xeon® Scalable Processor Family – Platinum, Gold – H, HL ..........29 Processor Population Rules ............................31 5. Memory Support ..............................32 Supported Memory ............................... - Page 6 11.4.2 Physical Presence ................................75 11.4.3 TPM Security Setup Options ............................. 75 11.5 Intel® CBnT – Converged Intel® Boot Guard and Trusted Execution Technology (Intel® TXT) ..76 12. System Management ............................77 12.1 Management Port................................77 12.1.1 Configuring System Management Port Using <F2> BIOS Setup ............... 77 12.2...
- Page 7 Intel® Server System M70KLP Family Technical Product Specification 12.2.2 Integrated BMC Web Console ........................... 80 12.2.3 Redfish* Support ................................81 12.2.4 IPMI 2.0 Support ................................81 12.2.5 Out-of-Band BIOS / BMC Update and Configuration..................81 12.2.6 System Inventory ................................81 12.2.7...
- Page 8 Figure 16. 4-post or Cabinet Rail Kit ..............................20 Figure 17. Architectural Block Diagram ............................22 Figure 18. SYSCFG Utility for Intel® Server System M70KLP – Utility Header Screenshot ........24 Figure 19. SYSFWUPDT Utility for Intel® Server System M70KLP – Utility Header Screenshot ......26 Figure 20.
- Page 9 Figure 52. Removable System Fan Bracket ............................ 55 Figure 53. Internal Cable Management ............................55 Figure 54. Mini-SAS HD to Slim-SAS Cable............................ 56 Figure 55. Intel® RAID RMFBU Accessory Support ........................56 Figure 56. Intel® RMFBU Installation ..............................57 Figure 57. Auxiliary PCIe* Cable ................................58 Figure 58.
- Page 10 Intel® Server System M70KLP Family Technical Product Specification List of Tables Table 1. Intel® Server System M70KLP Reference Documents and Support Collaterals ........... 10 Table 2. System Features / Specifications ............................12 Table 3. System Environmental Limits Summary ........................21 Table 4.
-
Page 11: Introduction
The Intel® Server System M70KLP is a purpose-built system that delivers power and performance at a peak efficiency in a 2U rack mount server form factor. It features the 3rd Gen Intel® Xeon® Scalable processor family in a four-socket configuration, delivering high core count and new hardware-enhanced security features. -
Page 12: Table 1. Intel® Server System M70Klp Reference Documents And Support Collaterals
Intel® Server System M70KLP Family Technical Product Specification For additional information, refer to the product support collaterals specified in the following table: Table 1. Intel® Server System M70KLP Reference Documents and Support Collaterals Document Topic Document Title or Support Collateral... -
Page 13: System Overview
This chapter provides an overview of the server system features and environmental support specifications. The Intel® Server System M70KLP family includes two base system configurations; a Standard system offering many configuration options, and a system with configurations and features specifically designed to support high-power graphics processor unit (GPU) add-in cards. -
Page 14: Table 2. System Features / Specifications
Maximum supported processor TDP: ≤ 250W ** Supported 3 Gen Intel® Xeon® Scalable processor SKUs must end in (H) or (HL). All other processor SKUs are not supported. ** Previous generation Intel® Xeon® processor and Intel® Xeon® Scalable processor families are... - Page 15 TPM 2.0 Option (Rest of the world) - iPC KLPTPM (Note: China only TPM not available) Security Intel® PFR – Intel® Platform Firmware Resilience Intel® CBnT – Converged Boot Guard and Intel® Trusted Execution (Intel® TXT) Rack mount rails Rack Mount Kit Tool-less attachment to chassis and rack installation...
-
Page 16: System Features Overview
Mounted atop the air duct are an M.2 interface board capable of support up to two (2) SATA M.2 SSDs, and mounting features to support up to three (3) Intel® RAID Maintenance Free Backup (RMFBU) modules. Figure 5. Standard System Air Duct... -
Page 17: Figure 6. Low Profile Air Duct (Gpu Systems Only)
Half-Length PCIe add-in card from each riser card assembly. Mounted atop the air duct is an M.2 interface board capable of supporting up to two (2) M.2 SATA SSDs, and a mounting feature to support one (1) Intel® RAID Maintenance Free Backup (RMFBU) module. -
Page 18: Figure 8. Gpu Enabled System - Back Panel Features
Supported power supply operating modes include: 1+1 Redundant and 2+0 combined power. Figure 9. Power Supply Module Important Note: All integrated L9 system configurations from Intel will draw greater than 1000W of power when running medium to heavy workloads. To support this power requirement, systems must be connected to a 220V AC input power source to operate. -
Page 19: Figure 10. 8 X2.5" Drive Configuration
Intel® Server System M70KLP Family Technical Product Specification The system has support options for 8, 16, or 24 front drive bays. Each drive bay includes a drive carrier that must be populated with a 2.5” drive (SSD or HDD) or supplied drive blank. Each set of eight drive bays is supported by a common backplane. -
Page 20: Figure 14. Server Board Features
Intel® Server System M70KLP Family Technical Product Specification Integrated within the server system is the Intel® M70KLP server board. The following illustration identifies its supported features and available system option interconnects. Figure 14. Server Board Features... -
Page 21: Chassis Dimensions
Intel® Server System M70KLP Family Technical Product Specification Chassis Dimensions 841mm 435mm 435mm 87mm Figure 15. Chassis Dimensions... -
Page 22: Rack And Cabinet Mounting Kit
Intel® Server System M70KLP Family Technical Product Specification Rack and Cabinet Mounting Kit The Intel® Server System M70KLP includes a rail kit for system installation into a 4-post rack or cabinet. The following installation guidelines should be observed. • For proper system ventilation, leave a minimum of 15 cm clearance in the front and rear of the system. -
Page 23: System Environmental Limits Summary
Advisory Note: Available rack and cabinet mounting kits are not designed to support shipment of the server system while installed in a rack. If you choose to do so, Intel advises verification of your shipping configuration with appropriate shock and vibration testing before shipment. Intel does not perform shipping tests that cover the complex combination of unique rack offerings and custom packaging options. -
Page 24: Architectural Overview
The architecture of Intel® Server System M70KLP product family is developed around the integrated features and functions of the following components: • Gen Intel® Xeon® Scalable Processor Family – Platinum 83xx and Gold 63xx (H) (HL) SKUs only • Intel® C621A chipset (PCH) •... -
Page 25: System Software And Utilities
AMIBCP, it is possible to obtain multiple ROM image flavors ready for production. The AMIBCP utility for this system is custom and is only available under NDA and upon request from Intel. AMI* ChangeLogo Utility – Customizing the BIOS Splash Screen The AMI* ChangeLogo utility allows developers to easily change splash screen logos displayed by BIOS at boot using the GUI or CLI. -
Page 26: Intel® System Configuration Utility (Syscfg)
Display selected BIOS settings Generally, this Intel utility can be used on any Intel server platform. However, the Intel® Server System M70KLP has a version of this utility that is only compatible for use on this platform. The SYSCFG utility used on other Intel server systems is NOT compatible with this server system. -
Page 27: System Update Package (Sup) For Intel® Server System M70Klp
Generally, this Intel utility can be used on any Intel server platform. However, the Intel® Server System M70KLP has a version of this utility that is only compatible for use on this platform. The SYSFWUPDT utility... -
Page 28: Intel® System Information Retrieval Utility (Sysinfo)
Figure Figure 19. SYSFWUPDT Utility for Intel® Server System M70KLP – Utility Header Screenshot For further SYSFWUPDT Utility information, download the Intel® System Firmware Update Utility User Guide. Intel® System Information Retrieval Utility (SYSINFO) The System Information Retrieval Utility is a command-line utility that provides the ability to collect system information, as fully described in the IPMI and BMC specifications. -
Page 29: Figure 20. Sysinfo Utility For Intel® Server System M70Klp - Utility Header Screenshot
Intel® Server System M70KLP Family Technical Product Specification Generally, this Intel utility can be used on any Intel server system. However, the Intel® Server System M70KLP has a version of this utility that is only compatible for use on this server product family. The SYSINFO utility used on other Intel server systems is NOT compatible with this server product family. -
Page 30: Processor Support
Intel® Server System M70KLP Family Technical Product Specification Processor Support The server board integrated within the Intel® Server System M70KLP product family includes four Socket P+ 4189 pin processor sockets identified on the server board as CPU 0 through CPU 3, as shown below. -
Page 31: Processor Heat Sink Module (Phm)
The PHM concept reduces the risk of damaging pins within the processor socket during the installation process. Reference the Intel® Server System M70KLP Service Guide for complete PHM assembly and installation instructions. Figure 23. Processor Heat Sink Module (PHM) Assembly Gen Intel®... -
Page 32: Figure 24. Intel® Xeon® Scalable Processor Sku Compatibility Chart
PCIe 3.0, 48 lanes (x16, x8, x4) Physical/Virtual Address Bits 46/48 SKU shelves SKUs in Platinum, Gold Note: (1) Feature may vary between processor SKUs. Reference 3 Gen Intel® Xeon® Scalable Processor specification sheets and product briefs for additional information... -
Page 33: Processor Population Rules
Note: The server board may support processor configurations consisting of different processors that meet the defined criteria. However, Intel does not perform validation testing of this configuration. In addition, Intel does not ensure that a server system configured with unmatched processors will operate reliably. The system BIOS attempts to operate with processors that are not matched but are generally compatible. -
Page 34: Memory Support
RAS features. The Intel® Server System M70KLP has support for up to 48 DDR4 DIMMs; 12 DIMM slots per processor. Each processor supports six memory channels identified as 0 through 5. Each memory channel has support for two DIMM slots identified as Slot 0 (White slots) and Slot 1 (Black slots). -
Page 35: Supported Memory
Intel® Server System M70KLP Family Technical Product Specification Supported Memory The Intel® Server System M70KLP supports standard DDR4 RDIMMs and LDRIMMs, and Intel® Optane™ persistent memory 200 series modules. Note: Previous generation Intel® Optane™ persistent memory modules are not supported. -
Page 36: Intel® Optane™ Persistent Memory 200 Series Support
SDRAM DIMMs, such as database “scratch pads”. Data that needs to be made persistent or structures that are very large can be routed to Intel® Optane™ persistent memory. The App Direct mode must be used to make data persistent in memory. This mode requires an operating system or virtualization environment enabled with a persistent memory-aware file system. -
Page 37: Memory Population Overview
Memory Population Overview The Intel® Server System M70KLP includes 48 memory slots (12 slots per processor) and can support memory configurations that consist of only DDR4 SDRAM DIMMs or can support configurations consisting of both DDR4 SDRAM DIMMs and Intel® Optane™ persistent memory. -
Page 38: Ddr4 Dram Dimm Population Rules
However, Intel may ship back a validated “Like” DIMM. A “Like” DIMM may be from the same vendor but may not be the same revision # or model #, or it may be an Intel validated DIMM from a different vendor. At a minimum, all “Like”... - Page 39 The following DDR4 SDRAM population rules apply for most reliable operation. • Mixed DDR4 DIMM rules: Note: Intel only supports mixed DDR4 DRAM DIMM configurations as defined in the Intel DDR4 Support Disclaimer above. o Mixing DDR4 DIMMs of different speeds and latencies is not supported within or across processors.
-
Page 40: Intel® Optane™ Persistent Memory 200 Series Population Rules
• A minimum of one PMem module per system. • When populating DDR4 DRAM + PMem, Intel recommends devices have a DDR4 DIMM capacity to PMem module capacity ratio of 1:1, 1:2, or 1:4 Examples) o 1:1 = 128 GB DRAM DIMM: 128 GB PMem Module... -
Page 41: Memory Ras Support
Depending on the processor SKU, Memory RAS feature support varies between Standard and Advanced options, as identified in the following table. All processor SKUs supported by the Intel® Server System M70KLP70 product family have support for the Advanced memory RAS features. - Page 42 Intel® Server System M70KLP Family Technical Product Specification Standard Advanced RAS Feature Description RAS SKU RAS SKU DDR4 write data CRC check within the DRAM device and signaling an event back to CPU/IMC for retry. DIMM will signal the CRC miss-match using DDR4 Write Data CRC PAR_ALERT signal.
-
Page 43: Intel® Optane™ Persistent Memory 200 Series Ras Features Overview
Intel® Optane™ Persistent Memory 200 Series RAS Features Overview Intel® Optane™ PMem 200 series devices support their own Reliability, Availability, and Serviceability (RAS) features. The PMem controller and its embedded firmware work in conjunction with the CPU iMC to provide the following RAS features. -
Page 44: Pci Express (Pcie*) Subsystem Overview
PCI Express (PCIe*) SubSystem Overview Gen Intel® Xeon® Scalable processors can provide up to 48 PCIe* 3.0 bus lanes to the host system. PCIe bus lanes from each processor are used to support various system features as shown in the following diagram. -
Page 45: Ocp* 3.0 Add-In Card Support
OCP* 3.0 Add-in Card Support The Intel® Server System M70KLP supports one (1) OCP 3.0 (Small form factor) add-in card. Supported OCP 3.0 cards have a pull-tab to remove the card from the system and a thumbscrew to secure it to the system. -
Page 46: Server Board - Pcie* Add-In Card Support
Server Board – PCIe* Add-in Card Support The server board within the Intel® Server System M70KLP includes six (6) onboard PCIe 3.0 add-in card slots: four (4) PCIe X8 + two (2) PCIe X16. A silkscreen label next to each add-in slot identifies the slot by number (PCIe 0 through PCIe 5) and by the CPU where its PCIe lanes are routed from (CPU0 through CPU3). -
Page 47: Pcie* Riser Slots
Section 7.6). Riser Card Card Support The Intel® Server System M70KLP has the option to support up to two riser card assemblies consisting of a riser card bracket, a riser card, and Auxiliary PCIe signal cables (as necessary). Riser Card... -
Page 48: Riser Slot #0 Assembly Bracket Overview
Intel® Server System M70KLP Family Technical Product Specification 6.4.1 Riser Slot #0 Assembly Bracket Overview With the Standard system options (No GPU support), all available add-in cards slots of riser card #0 can accommodate full-height, half-length PCIe add-in cards. In the GPU enabled system, with its low-profile air duct, riser card #0 supports one (1) GPU add-in card (full- height, full length, double wide) + one (1) full-height, half-length PCIe add-in card. -
Page 49: Riser Card Options
Intel® Server System M70KLP Family Technical Product Specification Figure 38. GPU Enabled System - Riser Slot #1 Full Height Bracket (with and without GPU Card) Using this assembly bracket, only four (4) of six (6) vertical PCIe add-in slots on the server board are accessible. -
Page 50: 3-Slot (2 X Pcie X16 + 1 X Pcie X8) Riser Card
Server Board X8 Slim-PCIe Connectors The Intel® M70KLP server board includes eight (8) X8 Slim-PCIe cable connectors. A bank of four connectors (labeled Slim0 – Slim3) on the left edge of the server board is supported by CPU 2. A bank of four connectors (labeled Slim4 –... -
Page 51: Figure 41. On-Board Slim-Line Pcie Connectors
Intel® Server System M70KLP Family Technical Product Specification 4 x Slim- PCIe X8 Connectors CPU #2 4 x Slim- PCIe X8 Connectors CPU #3 Figure 41. On-board Slim-line PCIe Connectors When cabled, each X8 Slim-PCIe connector provides the flexibility of either increasing the number of PCIe add-in cards being supported by a riser card or adds support for PCIe NVMe SSDs to the front drive bay. -
Page 52: Data Storage Options
Intel® Server System M70KLP Family Technical Product Specification Data Storage Options The Intel® Server System M70KLP includes support for different data storage options. This chapter provides an overview of each. Internal M.2 SATA SSD support Mounted atop of the system air duct is an M.2 SSD interface board that is cabled to a SATA interface connector on the server board. -
Page 53: Internal Usb 3.0
Intel® Server System M70KLP Family Technical Product Specification Internal USB 3.0 Located on the server board, directly behind CPU 1, is a Type A USB 3.0 connector that can be used to support a USB flash drive. USB 3.0 Type A... -
Page 54: Figure 46. Hot Swap Backplane - Front And Back Views
Intel® Server System M70KLP Family Technical Product Specification Each installed backplane is mounted internally to the back side of the drive bay using two key-hole studs and one captive thumbscrew allowing for tool-less removal and installation. On the front side of the backplane are eight drive interface connectors. Each connector supports SATA/SAS or PCIe NVMe drives. -
Page 55: Figure 47. Drive Carrier
Intel® Server System M70KLP Family Technical Product Specification All 2.5” drives are mounted to a drive carrier using four (4) screws. Drive removal from the chassis and installation into the chassis is tool-less. However, installing a drive into the drive carrier requires a Phillips* head screwdriver. -
Page 56: Cable Routing
Intel® Server System M70KLP Family Technical Product Specification On the backplane next to each of the eight drive interface connectors are Drive Fault and Drive Activity LEDs. Light pipes integrated within each drive carrier are used to project the light from these LEDs making them visible on the front face plate of the drive carrier as shown in the following illustration. -
Page 57: Figure 52. Removable System Fan Bracket
Intel® Server System M70KLP Family Technical Product Specification Several features designed within the chassis help to manage cables and create an aesthetically clean looking system. The system fan housing is modular and tool-less, allowing for easy removal and installation. The fan housing must be removed to route cables to or from the area behind the front drive bay. -
Page 58: Sas / Sas Raid Support
SAS / SAS RAID Support All backplanes and drive bays configured within an Intel® Server System M70KLP have support for 2.5” SAS or SATA drives. However, the system has no embedded SATA, SAS, or SAS RAID controller for use on the front drive bay. -
Page 59: Figure 56. Intel® Rmfbu Installation
Intel® Server System M70KLP Family Technical Product Specification All RMFBU modules are secured to the air duct using a hook and latch strap. Figure 56. Intel® RMFBU Installation Note: The mounting bracket included with the Intel RMFBU accessory kit is not used in this server system. -
Page 60: Pcie* Nvme* Support
Intel® Server System M70KLP Family Technical Product Specification PCIe* NVMe* Support All backplanes and drive bays configured within an Intel® Server System M70KLP have support for 2.5” U.2 PCIe NVMe SSDs. Using an Auxiliary PCIe cable, X8 PCIe bus lanes from any of eight Slim-PCIe connectors on the server board are cabled to matching Slim-PCIe connectors on the backplane. -
Page 61: Figure 59. Nvme* Storage Bus Event / Error Handling
PCIe root port within the processor’s PCIe controller. By default, Intel® VMD support is disabled on all processor PCIe* root ports. To enable VMD controller support for NVMe devices, Intel® VMD must be enabled on the appropriate processor PCIe* root ports in... -
Page 62: Figure 60. Onboard Slim-Pcie Connectors
The following table provides the PCIe* root port mapping information for each processor. Line items in bold black identify all the connectors on the server board that can be configured for NVMe support. Table 11. PCIe* Port Map for Intel® VMD Setup CPU #... -
Page 63: Figure 61. Intel® Vroc 7.5 Key Insertion
Graphical user interface (GUI) for Linux*. • 4K native NVMe* SSD support. Enabling the RAID features of Intel® VROC requires the installation of an optional upgrade key on to the server board as shown in the following figure. Figure 61. Intel® VROC 7.5 Key Insertion Available Intel®... -
Page 64: Front Control And I/O Panel Features Overview
Intel® Server System M70KLP Family Technical Product Specification Front Control and I/O Panel Features Overview Integrated within the front system handles are a control panel (Left) and I/O panel (Right). The left control panel includes Power and System ID/BMC Reset buttons and System Status LEDs. The right I/O Panel includes interface connectors for USB and Video. -
Page 65: Thermal Management Overview
Intel® Server System M70KLP Family Technical Product Specification Thermal Management Overview Managing airflow within the system is critical to having it operate with best performance and for maintaining long term reliability. The system pulls cool air (10–35°C) in from the front, channels it over and through several high heat generating components and areas within the chassis, and then pushes the hot air out the back. -
Page 66: Figure 65. System Fan Replacement
However, when hot swapping a system fan with the top cover removed, the procedure must be performed as quickly as possible to ensure the system remains operating below its critical thermal limit. See the Intel® Server System M70KLP Service Guide for complete fan replacement instructions. -
Page 67: Power Supply Fan
2. The system air duct must be installed. 3. All 48 memory slots must be populated with a memory device (DIMM or Intel® Optane™ PMem) or DIMM blank. Pre-installed DIMM blanks should only be removed when replacing it with a memory device. -
Page 68: 10. System Power Overview
Intel® Server System M70KLP Family Technical Product Specification 10. System Power Overview The Intel® Server System M70KLP supports up to two hot-swap capable power supply modules. Power supplies are installed from outside of the chassis into a single bay on the system back panel. -
Page 69: Dual Power Supply 1+1 Power Configuration
Intel® Server System M70KLP Family Technical Product Specification should throttling occur. Throttling will remain enabled until the sustained system power draw falls below the maximum limit of the power supply. Should the system power draw go beyond the maximum limit of the power supply with throttling enabled, then platform management will shut down the system. -
Page 70: 10.2 Power Supply Cold Redundancy
“Active” and the “Cold Stand-by”. A rolling configuration allows for equal loading over the lifetime of each power supply. 10.3 Power Supply Options The Intel® Server System M70KLP family supports a 2000-Watt AC (80-Plus Platinum) CRPS power supply module. Figure 69. 2000W AC Power Supply Module AC power supplies are auto-ranging and power factor corrected. -
Page 71: Power Supply Status Led
(180V~320Vdc) Low Line (90V~132Vac) Important Note: All fully integrated L9 system configurations from Intel will have a >1000W power draw with the system operating at moderate to heavy workloads. To support this power requirement, systems must be connected to a 220V AC input power source to operate. A system with a >1000W power draw that is... -
Page 72: 10.4 Auxiliary 12-Volt Power
75W. For GPU, or other high-power add-in cards, that require >75W of power to operate, additional 12- Volt Auxiliary power must be cabled to the card. In the Intel® Server System M70KLP, additional AUX 12-Volt power for add-in cards can be drawn from two 8-pin (Black 2x4) AUX power connectors on a power distribution board found mounted to the power supply bay. -
Page 73: Figure 73. Aux 12-Volt Power Cable
Intel® Server System M70KLP Family Technical Product Specification Figure 73. AUX 12-Volt Power Cable Table 17. AUX 12-Volt Power Cable Pinout Signal Connector P1 Wire Connector P2 Signal Name Pin # Color Pin # Name Black Black Black Black P12V... -
Page 74: 11. System Security Features Overview
Intel® Server System M70KLP Family Technical Product Specification 11. System Security Features Overview The Intel® Server System M70KLP family supports a variety of security options designed to prevent unauthorized access or tampering of settings. Security options supported include: • Password protection •... -
Page 75: Password Setup
Intel® Server System M70KLP Family Technical Product Specification 11.1.1 Password Setup The BIOS uses passwords to prevent unauthorized access or modification of system settings and options. Passwords can restrict entry to the BIOS Setup utility, restrict use of the Boot Device popup menu during POST, suppress automatic USB device re-ordering, and prevent unauthorized system power-on. -
Page 76: 11.2 Front Panel Lockout
In addition, a TPM device has encryption and hash functions. The Intel® Server System M70KLP family implements TPM as per TPM PC Client Specifications revision 2.0, published by the Trusted Computing Group (TCG). -
Page 77: Trusted Platform Module (Tpm) Security Bios
Intel® Server System M70KLP Family Technical Product Specification After the BIOS completes the measurement of its boot process, it hands off control to the operating system loader and, in turn, to the operating system. If the operating system is TPM-enabled, it compares the BIOS TPM measurements to the measurements of previous boots to make sure the system was not tampered with before continuing the operating system boot process. -
Page 78: Intel® Cbnt - Converged Intel® Boot Guard And Trusted Execution Technology (Intel® Txt)
Intel rearchitected and fused together the two technologies into Intel® CBnT (Converged Intel® Boot Guard and Trusted Execution Technology). Combining the two technologies into one made them more efficient, eliminated redundancies between them, simplified their implementation, and provided stronger protections. -
Page 79: 12. System Management
Intel® Data Center Manager (DCM) support ($$ Optional) The following subsections provide a brief description of each. 12.1 Management Port The Intel® Server System M70KLP includes a dedicated 1 Gb/s RJ45 management port used to access embedded system management features remotely. Management Port Figure 75. -
Page 80: Figure 76. Bios Setup Bmc Lan Configuration Screen
Intel® Server System M70KLP Family Technical Product Specification Figure 76. BIOS Setup BMC LAN Configuration Screen 3. The system is configured using the BMC Dedicated Network Configuration 4. For an IPv4 network: o If configuring the server management BMC LAN, scroll to Baseboard LAN configuration > IP source and then select either Static or Dynamic. -
Page 81: 12.2 Standard System Management Features
Once the management port is configured, the server can be accessed remotely to perform system management features defined in the following sections. 12.2 Standard System Management Features The following system management features are supported on the Intel® Server System M70KLP by default. • Virtual KVM over HTML5 •... -
Page 82: Integrated Bmc Web Console
Intel® Server System M70KLP Family Technical Product Specification The “soft keyboard” functionality supports the following layouts: English, Dutch, French, German, Italian, Russian, and Spanish. The KVM-redirection feature automatically senses video resolution for best possible screen capture and provides high-performance mouse tracking and synchronization. It allows remote viewing and configuration in pre-boot POST and BIOS Setup once BIOS has initialized video. -
Page 83: Redfish* Support
The BMC update will happen immediately and cause a BMC reset to occur at the end. The BIOS and Intel ME firmware is staged in the BMC and will be updated on the next reboot. The BMC also supports Redfish and embedded web console feature to view and modify BIOS settings. -
Page 84: Autonomous Debug Log
Intel. A license file is then downloaded onto the system where the Integrated BMC Web Console or the SYSCFG utility are used to upload the key to the BMC firmware to unlock the advanced features. -
Page 85: Virtual Media Over Network Share And Local Folder
12.4 Intel® Datacenter Manager (DCM) Support Intel® DCM is a solution for out-of-band monitoring and managing the health, power, and thermals of servers and a variety of other types of devices. -
Page 86: Appendix A - System Regulatory Information
Intel to its customers comply with the requirements for all regulatory certifications defined in the following table. It is the Intel customer’s responsibility to ensure their final server system configurations are tested and certified to meet the regulatory requirements for the countries to which they plan to ship and or deploy server systems into. - Page 87 CE regulatory requirements for the given product type, including those defined by EU Lot 9. It is the Intel customer’s responsibility to ensure their final server system configurations are SPEC® SERT™ tested and meet the new CE regulatory requirements.
- Page 88 Use of this information is at the sole risk of the user, and Intel assumes no responsibility...
- Page 89 Intel® Server System M70KLP Family Technical Product Specification...
-
Page 90: Appendix B - Statement Of Volatility
BMC: The server boards support an Intelligent Platform Management Interface (IPMI) 2.0 conformant baseboard management controller (BMC). The BMC provides health monitoring, alerting and remote power control capabilities for the Intel server board. The BMC does not have access to operating system level data. -
Page 91: Table 18. Server Board Components
Intel® Server System M70KLP Family Technical Product Specification Table 18. Server Board Components Component Type Size Board location User Data Name Non-Volatile 128 MB U208 No(BMC FW) BMC Flash Non-Volatile 64 MB U205 No(BIOS FW) BIOS Flash Non-Volatile 32KB Board Information/FRU... -
Page 92: Appendix C - Glossary Of Terms
American Society of Heating, Refrigerating and Air-Conditioning Engineers AVLS Adaptive Virtual Lockstep Baseboard Management Controller BIOS Basic Input/Output System Intel® CBnT Converged Boot Guard and Intel® Trusted Execution (Intel® TXT) Central Processing Unit Data Center Manager DDR4 Double Data Rate 4th edition DHCP Dynamic Host Configuration Protocol... - Page 93 Intel® Server System M70KLP Family Technical Product Specification Term Definition Intel® PFR Intel® Platform Firmware Resilience Processor Heat sink Module PMBus Power Management Bus PMem Persistent Memory Module POST Power-on Self-Test Power Supply Unit Pulse Width Modulation Quad Rank RAID...