Radius-Server Radius-Mac-Format; Radius-Server Vlan-Format - SMC Networks EliteConnect SMC2891W-AG User Manual

7
Command Line Interface
Example
SMC AP(config)#radius-server timeout-interim 500
SMC AP(config)#

radius-server radius-mac-format

This command sets the format for specifying MAC addresses on the RADIUS server.
Syntax
radius-server radius-mac-format <multi-colon | multi-dash | no-delimiter |
single-dash>
• multi-colon - Enter MAC addresses in the form xx:xx:xx:xx:xx:xx.
• multi-dash - Enter MAC addresses in the form xx-xx-xx-xx-xx-xx.
• no-delimiter - Enter MAC addresses in the form xxxxxxxxxxxx.
• single-dash - Enter MAC addresses in the form xxxxxx-xxxxxx.
Default Setting
No delimiter
Command Mode
Global Configuration
Example
SMC AP(config)#radius-server radius-mac-format multi-dash
SMC AP(config)#

radius-server vlan-format

This command sets the format for specifying VLAN IDs on the RADIUS server.
Syntax
radius-server vlan-format <hex | ascii>
• hex - Enter VLAN IDs as a hexadecimal number.
• ascii - Enter VLAN IDs as an ASCII string.
Default Setting
Hex
Command Mode
Global Configuration
Example
SMC AP(config)#radius-server vlan-format ascii
SMC AP(config)#
7-64