A
Troubleshooting
3.
If you cannot access the on-board configuration program via a serial port
connection:
• Be sure you have set the terminal emulator program to VT100 compatible, 8
data bits, 1 stop bit, no parity and 9600 bps.
• Check that the null-modem serial cable conforms to the pin-out connections
provided on page B-3.
4.
If you forgot or lost the password:
• Contact your dealer for help.
5.
If all other recovery measure fail, and the access point is still not functioning
properly, take any of these steps:
• Reset the access point's hardware using the console interface, web interface,
or through a power reset.
A-2