Advanced Configuration - SMC Networks EliteConnect SMC2891W-AG User Manual

802.11a/g outdoor enterprise access point
Hide thumbs Also See for EliteConnect SMC2891W-AG:
Table of Contents

Advertisement

6
System Configuration

Advanced Configuration

The Advanced Configuration pages include the following options.
Menu
System
Identification
TCP / IP Settings
RADIUS
SSH Settings
Authentication
Filter Control
VLAN
WDS Settings
AP Management
Administration
System Log
RSSI
SNMP
SNMP
SNMP Trap Filters
SNMP Targets
Radio Interface A
Radio Settings
Security
6-2
Table 6-1. Menu
Description
Configures basic administrative and client access
Specifies the host name
Configures the IP address, subnet mask, gateway, and domain
name servers
Configures the RADIUS server for wireless client authentication
and accounting
Configures Secure Shell management access
Configures 802.1X client authentication, with an option for MAC
address authentication
Filters communications between wireless clients, access to the
management interface from wireless clients, and traffic matching
specific Ethernet protocol types
Enables VLAN support and sets the management VLAN ID
Configures bridge or repeater modes for each radio interface and
sets spanning tree parameters
Configures access to management interfaces
Configures user name and password for management access;
upgrades software from local file, FTP or TFTP server; resets
configuration settings to factory defaults; and resets the access
point
Controls logging of error messages; sets the system clock via
SNTP server or manual configuration
Configures RSSI value display, bridge link distance, and LED
display mode
Configures SNMP settings
Controls access to this access point from management stations
using SNMP, as well as the hosts that will receive trap messages
Defines trap filters for SNMPv3 users
Specifies SNMPv3 users that will receive trap messages
Configures the IEEE 802.11a interface
Configures common radio signal parameters and other settings for
each VAP interface
Enables each virtual access point (VAP) interface, sets the Service
Set Identifier (SSID), and configures wireless security
Page
6-3
6-3
6-4
6-7
6-11
6-12
6-17
6-19
6-21
6-27
6-28
6-33
6-37
6-40
6-40
6-48
6-50
6-51
6-53
6-70

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eliteconnect smc2890w-ag2890w-ag2891w-ag

Table of Contents