Radius-Server Retransmit; Radius-Server Timeout - SMC Networks EliteConnect SMC2891W-AG User Manual

7
Command Line Interface

radius-server retransmit

This command sets the number of retries.
Syntax
radius-server [secondary] retransmit number_of_retries
• secondary - Secondary server.
• number_of_retries - Number of times the access point will try to
authenticate logon access via the RADIUS server. (Range: 1 - 30)
Default Setting
3
Command Mode
Global Configuration
Example
SMC AP(config)#radius-server retransmit 5
SMC AP(config)#

radius-server timeout

This command sets the interval between transmitting authentication requests to the
RADIUS server.
Syntax
radius-server [secondary] timeout number_of_seconds
• secondary - Secondary server.
• number_of_seconds - Number of seconds the access point waits for a reply
before resending a request. (Range: 1-60)
Default Setting
5
Command Mode
Global Configuration
Example
SMC AP(config)#radius-server timeout 10
SMC AP(config)#
7-62