Table of Contents
Advertisement
7
Command Line Interface
Command Usage
This command sets the local time zone relative to the Coordinated Universal
Time (UTC, formerly Greenwich Mean Time or GMT), based on the earth's
prime meridian, zero degrees longitude. To display a time corresponding to
your local time, you must indicate the number of hours and minutes your time
zone is east (before) or west (after) of UTC.
Example
SMC AP(config)#sntp-server timezone +8
SMC AP(config)#
show sntp
This command displays the current time and configuration settings for the SNTP
client.
Command Mode
Exec
Example
SMC AP#show sntp
SNTP Information
=========================================================
Service State
SNTP (server 1) IP
SNTP (server 2) IP
Current Time
Time Zone
Daylight Saving
=========================================================
SMC AP#
7-38
: Enabled
: 137.92.140.80
: 192.43.244.18
: 08 : 04, Jun 20th, 2003
: +8 (TAIPEI, BEIJING)
: Enabled, from Jun, 1st to Sep, 1st
Advertisement
Table of Contents
