Antenna Control; Antenna Id - SMC Networks EliteConnect SMC2891W-AG User Manual

antenna control

This command selects the use of two diversity antennas or a single antenna for the
radio interface.
Syntax
antenna control <diversity | left | right>
• diversity - The radio uses two identical antennas in a diversity mode.
• left - The radio uses a single antenna on the left side. Select this method
when using an optional external antenna that is connected to the left
antenna connector. Also select this method when using the integrated
5 GHz antenna.
• right - The radio uses a single antenna on the right side. Select this method
when using an optional external antenna that is connected to the right
antenna connector.
Default Setting
Diversity
Command Mode
Interface Configuration (Wireless)
Command Usage
The antenna ID must be selected in conjunction with the antenna control
method to configure proper use of any of the antenna options.
Example
SMC AP(if-wireless g)#antenna control right
SMC AP(if-wireless g)#

antenna id

This command specifies the antenna type connected to the access point
represented by a four-digit hexadecimal ID number, either the integrated antenna
(ID:0000) or an optional external antenna.
Syntax
antenna id <antenna-id>
• antenna-id - Specifies the ID number of an approved antenna that is
connected to the access point
(Range: 0x0000 - 0xFFFF)
Default Setting
0x0000 (Integrated antenna)
Wireless Interface Commands
7
7-103