4
Hardware Installation
2.4 GHz N-type Connector
Connect Cables to the Unit
Do not connect or disconnect cables or otherwise work with the bridge
Warning:
during periods of lightning activity.
1.
Attach the Ethernet cable to the Ethernet port on the wireless bridge.
2.
For extra protection against rain or moisture, apply weatherproofing tape (not
included) around the Ethernet connector.
3.
Be sure to ground the unit with an appropriate grounding wire (not included) by
attaching it to the grounding point on the base of the unit using the screw
provided in the package.
Be sure that grounding is available and that it meets local and national
Caution:
electrical codes. For additional lightning protection, use lightning rods,
lightning arrestors, or surge suppressors.
Note:
The Ethernet cable included with the package is 30 m (100 ft) long.
4-6
5 GHz
N-type Connector
RF Coaxial Cable
5 GHz External
High-gain Panel
Antenna
2.4 GHz External
Omnidirectional
Antenna