Snmp-Server Filter-Assignments; Show Snmp Groups - SMC Networks EliteConnect SMC2891W-AG User Manual

snmp-server filter-assignments

This command assigns SNMP v3 notification filters to targets. Use the no form to
remove an SNMP v3 filter assignment.
Syntax
snmp-server filter-assignments <target-id> <filter-id>
no snmp-server filter-assignments <target-id>
• target-id - A user-defined name that identifies a receiver of SNMP
notifications. (Maximum length: 32 characters)
• filter-id - A user-defined name that identifies an SNMP v3 notification filter.
(Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Example
SMC AP(config)#snmp-server filter-assignments mytraps trapfilter
SMC AP(config)#exit
SMC AP#show snmp target
Host ID : mytraps
User : chris
IP Address : 192.168.1.33
UDP Port : 162
=============================
SMC AP#show snmp filter-assignments
SMC AP(config)#

show snmp groups

This command displays the SNMP v3 pre-defined groups.
Syntax
show snmp groups
Command Mode
Exec
HostID FilterID
mytraps trapfilter
7
SNMP Commands
7-51