Configure; End; Exit - SMC Networks EliteConnect SMC2891W-AG User Manual

7
Command Line Interface

configure

This command activates Global Configuration mode. You must enter this mode to
modify most of the settings on the access point. You must also enter Global
Configuration mode prior to enabling the context modes for Interface Configuration.
See "Using the Command Line Interface" on page 1.
Default Setting
None
Command Mode
Exec
Example
SMC AP#configure
SMC AP(config)#
Related Commands

end (7-8)

end
This command returns to the previous configuration mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration
Example
This example shows how to return to the Configuration mode from the Interface
Configuration mode:
SMC AP(if-ethernet)#end
SMC AP(config)#

exit

This command returns to the Exec mode or exits the configuration program.
Default Setting
None
Command Mode
Any
7-8