SMC Networks EliteConnect SMC2891W-AG User Manual page 91

• Port Number: Selects a specific WDS port for which to display the RSSI output
value. Ports 1-6 are available for a Master unit, only port 1 for a Slave unit.
(Default: 1)
Distance:
• Mode: Indicates if the 802.11a radio is operating in normal or Turbo mode. (See
"Radio Settings A" on page 6-53.)
• Distance: The approximate distance between antennas in a bridge link.
LED Status
• Mode – Selects AP mode or Bridge mode.
• Bridge Port – Allows the user to select the bridge port on which to monitor traffic.
(Default:1; Range: 1~6)
There are currently no equivalent CLI commands for the RSSI controls.
Advanced Configuration
6
6-39