Rogue-Ap Scan - SMC Networks EliteConnect SMC2891W-AG User Manual

Example
SMC AP(if-wireless g)#rogue-ap interval 120
SMC AP(if-wireless g)#
Related Commands
rogue-ap duration (7-118)

rogue-ap scan

This command starts an immediate scan for access points on the radio interface.
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless)
Command Usage
While the access point scans a channel for rogue APs, wireless clients will not
be able to connect to the access point. Therefore, avoid frequent scanning or
scans of a long duration unless there is a reason to believe that more
intensive scanning is required to find a rogue AP.
Example
SMC AP(if-wireless g)#rogue-ap scan
SMC AP(if-wireless g)#rogueApDetect Completed (Radio G) : 9 APs detected
rogueAPDetect (Radio G): refreshing ap database now
SMC AP(if-wireless g)#
Rogue AP Detection Commands
7
7-119