Command Mode
Global Configuration
Example
SMC AP(config)#system name AP
SMC AP(config)#
username
This command configures the user name for management access.
Syntax
username <name>
name - The name of the user.
(Length: 3-16 characters, case sensitive)
Default Setting
admin
Command Mode
Global Configuration
Example
SMC AP(config)#username bob
SMC AP(config)#
password
After initially logging onto the system, you should set the password. Remember to
record it in a safe place. Use the no form to reset the default password.
Syntax
password <password>
no password
password - Password for management access.
(Length: 3-16 characters, case sensitive)
Default Setting
smcadmin
Command Mode
Global Configuration
Example
SMC AP(config)#password
SMC AP(config)#
System Management Commands
7
7-15