Closed-System; Max-Association - SMC Networks EliteConnect SMC2891W-AG User Manual

7
Command Line Interface

closed-system

This command prohibits access to clients without a pre-configured SSID. Use the no
form to disable this feature.
Syntax
closed-system
no closed-system
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
When closed system is enabled, the access point will not include its SSID in
beacon messages. Nor will it respond to probe requests from clients that do
not include a fixed SSID.
Example
SMC AP(if-wireless g: VAP[0])#closed-system
SMC AP(if-wireless g)#

max-association

This command configures the maximum number of clients that can be associated
with the access point at the same time.
Syntax
max-association <count>
count - Maximum number of associated stations. (Range: 0-64)
Default Setting
64
Command Mode
Interface Configuration (Wireless-VAP)
Example
SMC AP(if-wireless g: VAP[0])#max-association 32
SMC AP(if-wireless g)#
7-110