Encryption - SMC Networks EliteConnect SMC2891W-AG User Manual

Example
SMC AP(if-wireless g: VAP[0])#auth shared-key
SMC AP(if-wireless g)#
Related Commands

encryption (7-123)

key (7-124)
encryption
This command enables data encryption for wireless communications. Use the no
form to disable data encryption.
Syntax
encryption
no encryption
Default Setting
disabled
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
• Wired Equivalent Privacy (WEP) is implemented in this device to prevent
unauthorized access to your wireless network. For more secure data
transmissions, enable encryption with this command, and set at least one
static WEP key with the key command.
• The WEP settings must be the same on each client in your wireless
network.
• Note that WEP protects data transmitted between wireless nodes, but does
not protect any transmissions over your wired network or over the Internet.
• You must enable data encryption in order to enable all types of encryption
(WEP, TKIP, and AES-CCMP) in the access point.
Example
SMC AP(if-wireless g: VAP[0])#encryption
SMC AP(if-wireless g)#
Related Commands
key (7-124)
Wireless Security Commands
7
7-123