Prompt; System Name - SMC Networks EliteConnect SMC2891W-AG User Manual

7
Command Line Interface
Command Usage
• If you purchased an access point outside of the United States, the country
code must be set before radio functions are enabled.
• The available Country Code settings can be displayed by using the country
? command.
Example
SMC AP#country tw
SMC AP#

prompt

This command customizes the CLI prompt. Use the no form to restore the default
prompt.
Syntax
prompt <string>
no prompt
string - Any alphanumeric string to use for the CLI prompt.
(Maximum length: 32 characters)
Default Setting
SMC AP
Command Mode
Global Configuration
Example
SMC AP(config)#prompt RD2
RD2(config)#

system name

This command specifies or modifies the system name for this device. Use the no
form to restore the default system name.
Syntax
system name <name>
no system name
name - The name of this host.
(Maximum length: 32 characters)
Default Setting
SMC AP
7-14