Description; Ssid - SMC Networks EliteConnect SMC2891W-AG User Manual

description

This command adds a description to a the wireless interface. Use the no form to
remove the description.
Syntax
description <string>
no description
string - Comment or a description for this interface.
(Range: 1-80 characters)
Default Setting
Radio A: Enterprise 802.11a Access Point
Radio G: Enterprise 802.11g Access Point
Command Mode
Interface Configuration (Wireless-VAP)
Example
SMC AP(if-wireless g: VAP[0])#description RD-AP#3
SMC AP(if-wireless g: VAP[0])#

ssid

This command configures the service set identifier (SSID).
Syntax
ssid <string>
string - The name of a basic service set supported by the access point.
(Range: 0 - 7 characters)
Default Setting
802.11a Radio: SMC_VAP_11A (0 to 3)
802.11g Radio: SMC_VAP_11G (0 to 3)
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
Clients that want to connect to the wireless network via an access point must
set their SSIDs to the same as that of the access point.
Example
SMC AP(if-wireless g: VAP[0])#ssid RD-AP#3
SMC AP(if-wireless g)#
Wireless Interface Commands
7
7-109